Complete with ECU, compass and display - Simply choose the correct pump to complete your pilot. The GHP 10 marine autopilot adds a whole new level of versatility to the Garmin marine line. This breakthrough unit gives power boat users an easy to use autopilot system to rely upon for auto-guided navigation. Experience the Ease of Shadow Drive™ Technology The GHP 10’s patented Shadow Drive™ technology gives boaters the security of knowing they maintain control even when relying upon the autopilot. The Shadow Drive system automatically disengages the autopilot if the helm is turned, allowing the helmsman to maneuver the boat. The autopilot automatically re-engages when a steady course is held by the helmsman. Enjoy the Simple Interface & NMEA Connectivity The GHP 10 is controlled using the GHC 10. This control unit communicates with the autopilot system via a NMEA 2000 bus, so autopilot heading data can easily be shared with other devices. The GHP 10's simple interface makes operation a cinch. And up to three GHC 10 controllers can be interfaced with a single GHP 10, allowing for autopilot capabilities in multiple stations on your boat. Product Features and Specifications Patented Shadow Drive technology – allows users to make manual course changes without manually disengaging the autopilot No failure prone rudder angle sensor needed – calculates rudder command from a combination of compass, gyro and engine inputs Stress-free turns based on the G-force felt by its included rate gyro Whether accelerating or decelerating, the GHP 10’s response is fast, precise and automatic GHP 10 autopilot includes one GHC 10 helm control display – up to three GHC 10’s can be interfaced to a single GHP 10 autopilot system GHC 10 helm control display has a simple user interface making user operation a cinch Installation wizard helps users to automatically configure the GHC 10 helm control display GHC 10’s Display: 3.5” TFT, QVGA color LCD display (320 x 240 pixels) GHC 10 has a new through-chassis mountable case design – removable top and bottom snap covers provide for easier flush mounting GHC 10 unit dimension: 4.4” H x 4.3” W x 1.9” D (11.1cm H x 10.9cm W x 4.8cm D) Interface: NMEA 2000 (GHP 10 & GHC 10), NMEA 0183 (GHC 10) GHP 10 supply voltage: 10 to 20V GHC 10 supply voltage: 7 to 32V GHP 10 & GHC 10 operating temperature: -15° C to 70 C° (5° F to 158° F) Users can configure the GHC 10 to automatically turn on when power is applied - The GHP 10 performs so well, it even works in reverse
Whats in the box: GHC 10 helm control display ECU CCU Shadow drive CCU/ECU interconnect cable Buzzer ECU power cable NMEA 2000 drop cable NMEA 2000 T-connector | 
