GT8HW-IH transducer is ideal for bass boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It requires a flat section in the hull to be mounted and is excellent for boats traveling at high speeds that want to maintain accurate depth readings.
The 8-pin transducer features high-wide CHIRP traditional sonar (150-240 kHz) and has a power rating of 250 W. It can be used in conjunction with a GT30-TM transducer and an adapter cable so you can maintain depth at high speeds and scanning capabilities at trolling speeds.
For installation, follow the included instructions carefully to avoid damaging your boat.
What's in the box:
- GT8HW-IH transducer
- In-hull fitting
- Documentation
COMPATIBILITY:
| | GT8HW-TM | GT8HW-IF | GT8HW-IH New | GT15M-IH | GT15M-TM New |
| STRIKER 4cv, 5cv and 7cv fishfinders | •1 | • | •1 | •1 | •1 |
| STRIKER 7sv fishfinder | •1 | • | •1 | •1 | •1 |
| echoMAP CHIRP 45cv and 55cv combo series | •1 | • | •1 | •1 | •1 |
| echoMAP CHIRP 75cv combo series | • | •3 | • | • | • |
| echoMAP CHIRP 75sv and 95sv combo series | •2 | | •2 | •2 | •2 |
| GPSMAP xs combo series | • | •3 | • | • | • |
| GPSMAP xsv combo series | • | •3 | • | • | • |
| GSD 25 digital sonar | • | •3 | • | • | • |
1 Requires 8-pin transducer to 4-pin sounder adapter cable (010-11947-00)
2 Requires 8-pin transducer to 12-pin sounder adapter cable (010-12122-10)
3 Requires 4-pin transducer to 8-pin sounder adapter cable (010-11948-00)
