r Converters & Diodes - Victron Energy Argofet 100-3 FET Isolator - 3 Batteries 100A
Log In  |  Register  |  Cart Contents  |  Checkout   
Telephone numbers
/ Products / Electrical / Accessories / Converters & Diodes / Victron Energy Argofet 100-3 FET Isolator - 3 Batteries 100A
Cactus Fishing
Manufacturers

Victron Energy Argofet 100-3 Fet Isolator - 3 Batteries 100a
[ZVICARG100301020]

Manufacturers Part Number: ARG100301020

£93.67
(£112.40 Inc VAT)

Standard UK delivery is currently
10 - 12 working days
on this product.

Tell a Friend

Notifications



Write Review
Call now for an instant price match
Victron Energy Argofet 100-3 FET Isolator - 3 Batteries 100A

Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.

When using ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. Care should taken however to keep cable lengths short and of sufficient cross section.

Example: When a current of 100 A flows through a cable of 50 mm cross section (AWG 0) and 10 m length (30 ft), the voltage drop over the cable will be 0,26 Volt. Similarly a current of 50 A through a cable of 10 mm cross section (AWG 7) and 5 m length (15 ft) will result in a voltage drop of 0,35 Volt!

Alternator energize input

Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start. The new Argofet isolators have a special current limited energize input that will power the B+ when the engine run/stop switch is closed.

Features:
  • Maximum charge current (A): 100
  • Maximum alternator current (A): 100
  • Number of batteries: 3
  • Connection: M8 bolts
  • Weight kg: 1.4
  • Dimensions h x w x d in mm: 65 x 120 x 200
There are currently no reviews for this product.

Click here to submit a review
This product was added to our catalog on Wednesday 04 December, 2013.
We accept
Currently viewing:  Converters & Diodes - Victron Energy Argofet 100-3 FET Isolator - 3 Batteries 100A
Shipping Costs
Destination:
Standard Delivery
Shipping to United Kingdom ( Box)
£5.94
Find us on:
Follow Mesltd on Twitter   Visit our You Tube page   Find Mesltd on Facebook

We accept payment by all major credit cards via PayPal
Worldwide Deliveries via DHL